How to Fix the Sliding Closet Doors for Bedrooms?

Jul 7th

Sliding Closet Doors for Bedrooms – When you have a closet with sliding doors, it is very common for inconveniences to arise with its opening and closing, either because the wheel of the guide comes out or because of small traffic jams in it. Therefore, in this article, I will explain how to fix the sliding door of a closet. When a closet sliding door gives problems, it is normal that one of the wheels has left the guide, that there is a jam caused by accumulated dirt, or both at the same time. It is also possible that the wheels have been misaligned.

Sliding Closet Doors for Bedrooms Target
Sliding Closet Doors for Bedrooms Target

If in your case the problem is that the wheel of sliding closet doors for bedrooms has left your guide, the solution is as easy as re-fitting it into it. For this, you will need a screwdriver with which to loosen the fittings a bit and put it back carefully into the guide. But if on the contrary, the problem is caused by blockages or misalignments of the wheels, follow these steps: first of all, with the help of a vacuum cleaner, remove all the accumulated dirt in the guide. Sometimes dust and lint cause jams and prevent doors from running properly.

12 Photos Gallery of: How to Fix the Sliding Closet Doors for Bedrooms?

Image of: Sliding Closet Doors for Bedrooms Target
Image of: Sliding Closet Doors for Bedrooms System
Image of: Sliding Closet Doors for Bedrooms Images
Image of: Sliding Closet Doors for Bedrooms DIY
Image of: Modern Sliding Closet Doors for Bedrooms
Image of: Installing Sliding Closet Doors for Bedrooms
Image of: Fix Sliding Closet Doors for Bedrooms
Image of: DIY Sliding Closet Doors for Bedrooms
Image of: Bypass Sliding Closet Doors for Bedrooms
Image of: Buy Sliding Closet Doors for Bedrooms
Image of: 6 Panel Sliding Closet Doors for Bedrooms
Image of: Wood Sliding Closet Doors for Bedrooms
 

As with the guide, perform the same operation with the wheel fittings. Check if after cleaning the guide and fittings the door runs properly, if so, perfect, you have already solved your problem. But if still, the problem persists, is that the door is fallen and uneven, therefore you will have to adjust the screws of the fittings to raise or lower the door, for this, you will need a screwdriver. When you tighten the screws, the door rises, and when you loosen them, it goes down. Remember that you have to check all the fittings so that the solution is optimal. Once you have followed these steps, you already have your sliding closet doors for bedrooms fixed.