Closet sliding door track – Practice to be elegant, a closet sliding door is very convenient. It gives a wide opening and saves space as it does not swing. The door operates on a top and bottom track and it travels effortlessly back and forth. When there is a problem with the control of your sliding door, you can simply fix it by following a few simple instructions. Lift your cabinet sliding door up into the top slots. Turn part of the door towards you and pull out the door from the closet.
Remove the rollers from the slot and ensure that they are in good condition. You will have to replace them if they are broken. Carry your rolls to the hardware store while buying new ones to get the exact size that will fit your closet sliding door. Screw the top track with the screwdriver. Do the same with the lower track and set aside. Take the new track and make sure it is of the required length and width. Remove the old roller bearing plates from your closet door and replace them. Lift the door and put it into the top slot. Let the door slowly fall into the bottom closet sliding door track. Stand back a few feet from your closet to make sure the cabinet door is properly adjusted.
12 Photos Gallery of: Fixing Closet Sliding Door Track
Implementing regular maintenance of your closet sliding door slots will eliminate common problems such as jamming your door. Use a vacuum cleaner or brush to clean the groove frequently and remove any residue and dirt that may have formed. Also check if the track is bent. To restore your cabinet door to run smoothly when the track is bent, you can also fit a piece of wood into the closet sliding door track. Hold the tree and use a hammer to shape the groove against the tree.Sliding Door Track Kit Closet, door track, glass sliding door recessed into wall, sliding door for closet, wordrobe doors