Installing Bifold Closet Doors
Bifold closet doors – Installing Bifold Doors is an easy improvement to do in any home, and it takes some time. Bifold doors are usually used as wardrobe doors, and they add a touch of elegance to any room. If you have sliding wardrobe doors common in many older homes, remove them and install Bifold doors is an upgrade many will appreciate, especially if you plan to sell the house.
Measure the length and width of the wardrobe opening. When buying bifold closet doors, make sure to order a style that is an inch less than the actual width of your wardrobe and 1:59 inches shorter than the actual height wardrobe opening. Paint Bifold doors, if desired, before installation. Add the hardware to the doors, which includes the turntables and locking arms. Because each batch will vary depending on the style of the doors, your kit will have a chart so you know exactly where to place each part of the hardware.
Drill and install metal traces from the kit to the top of the wardrobe opening with the provided screws. Screw the brackets of the brackets into the floor directly under the roof cavity. Use a plank string to help you adjust the upper lane with the lower brackets. A lot is a metal or brass bulb attached to a string like when you hang up a vertical position, hanging down directly. It is a useful tool to use instead of using a level.
Lift bifold closet doors, and place the pin on the top of the door in the groove. Make sure that the bottom pin on the part of the door closest to the side wall is installed in the floor bracket. Install the other bifold door in the same way. Enter the wardrobe, and attach the gap alignment hardware six inches from the floor between the two folding doors. Then do the same with the other two folding doors. Install the door handles on folding doors.